• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Casualplay

    AJ Laser 230z 73" Build Thread

    For resin I have their 2050 and for hardener I have the 3100s slow. They quote a pot life of 50 mns but here in Florida its closer to 30 mns
  2. Casualplay

    AJ Laser 230z 73" Build Thread

    Thanks everyone, no hole it is! I fuel proofed the firewall and the inside of the fuel line/throttle linkage holes with laminating epoxy from Resin Research: http://resinresearch.net/ Their epoxy is fantastic, durable and super clear...I bought a gallon a few years ago when I was flying and...
  3. Casualplay

    AJ Laser 230z 73" Build Thread

    Hey guys, I have a quick question concerning motor mounting....the AJ Laser manual shows a cutout in the firewall just behind the carb. I've got a DLE 35RA mounted and it clears the firewall - should I cut a hole in the firewall anyway for better airflow into the carb, or should I leave it...
  4. Casualplay

    AJ Laser 230z 73" Build Thread

    Have you tried increasing the amount of throw using the travel adjust in your servo sub menu? You loose some resolution going above 100% but sometimes an extra 25% or 50% above that makes a difference.
  5. Casualplay

    New Here? Introduce yourself!

    We moved from Brainerd, Minnesota - Nice place, but the building season was too long and flying season too short.
  6. Casualplay

    AJ Laser 230z 73" Build Thread

    Thanks, exactly what I was planning. Did you use a 1.5" servo arm for the rudder? I ordered 1.25" arms for the ailerons and 1.50" arms for the elevator and rudder.
  7. Casualplay

    New Here? Introduce yourself!

    Hi everyone, thanks for the kind welcome! My name is Trent, been building models for 40 years, flying RC for 13 with some breaks...I live in Cape Coral Fl - 3 miles from our local field RSeahawks: http://rseahawks.org/ Since moving to Fl last fall I've started flying gas planes and my nitro...
  8. Casualplay

    AJ Laser 230z 73" Build Thread

    I'm in the process of building mine (v2)....I'm going with a tail mounted servo (Savox 1270tg) for the rudder and elevator, anyone have any thoughts?
  9. Casualplay

    SupaTim builds a 73" AJ Laser!!

    Thanks for the info...are you running the Savox 1256 on 6.6 as well?
  10. Casualplay

    SupaTim builds a 73" AJ Laser!!

    Tim, 2 questions for you... 1) Are you using a voltage regulator between the battery and RX? If no, I am assuming that the Savox 1256 servos are happy at 6.6v 2) What size fuel tank are you using? Thanks for your time!!
View older results
Top