• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. 3dNater

    Aj aircraft 93,73,56 laser

    Great flying!
  2. 3dNater

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    I'm sorry you are frustrated man. I think you should give Aerobeez a chance to address the situation before jumping ship totally. My experience with them on the service side has been pretty awesome. Have you tried calling them yet? I think the wings are a simple fix so you shouldn't be...
  3. 3dNater

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    You will do great Bushwacker. This really is a small issue, although I agree it should have been right to begin with. Have you checked the fit of everything else? Have you put the wings, cowl, and canopy on to check? If those aren't right then you have real issues.
  4. 3dNater

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    I'm guessing those slots are longer than the hinge is wide... is there room to move them side to side some? Also, the slots in the covering can be really hard to find/see. If you have to cut new slots it isn't super hard. You can use an exacto blade to carefully make slots. Tower sells a...
  5. 3dNater

    3DHS and Extreme Flight Merger?

    Lol :p
  6. 3dNater

    50-60cc pau edge 540 build

    Ultracote is nice... but really functions similar to monokote... just at a much lower temp.
  7. 3dNater

    The 3DRCForums -Discuss Anything Thread-

    Any chance you could find a link to the shelving system you used? I really like that.
  8. 3dNater

    50-60cc pau edge 540 build

    Looks great man! Nice job on the cowl!
  9. 3dNater

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    So call it 2500 watts... 8.5 pounds puts it just shy of 300 watts per pound. That is a rocket ship dude! The bad spool up is what is hurting you.
  10. 3dNater

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    Nah, you need to swap that out until a suitable firmware upgrade is really available.
  11. 3dNater

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    Ok, bummer on the slow spin-up. I'm guessing your total watt/pound is good but feels lack - luster due to the ztw issue :(
  12. 3dNater

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    How many watts is that setup on the vyper?
  13. 3dNater

    The 3DRCForums -Discuss Anything Thread-

    I do really like this one... :D It looks like it would operate way smoother than the solution I ended up going with... I just had to get that stuff out of the way last night or I was going to go nuts lol.
  14. 3dNater

    The 3DRCForums -Discuss Anything Thread-

    I ended up using bungee chords hung from some little coat hangars I had kicking around. You know, the kind with a couple of holes you can mount anywhere? I never had to leave the house and I have planes hanging from the wall. Thanks for the suggestions guys. I may build me a nice pvc hanger...
  15. 3dNater

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    From the 3dhs 72 Extra thread Enterprise said "The pilot is a 12 pound plane. This one can be built electric under 10. You can get a 4330-225 and either run a big prop on 10s or 19x8 on 12s." AKfreak has been running 12s on a 30cc setup with motrofly for a while. I have seen his plane fly...
  16. 3dNater

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    Why do people keep saying this? A lower kv will let you run a bigger prop. Get the right wind and it will be great...
  17. 3dNater

    The 3DRCForums -Discuss Anything Thread-

    I was thinking, because it is a gasser, I want to hang it with the engine up. That is why I was thinking gear.
  18. 3dNater

    The 3DRCForums -Discuss Anything Thread-

    Well Gents, I need info on the best way to hang up my airplanes in the garage. I want to put them on the wall, probably hanging by the gear. Thoughts?
  19. 3dNater

    New to 3D

    I love my 39" crack yak! Mine is the one AKfreak built in the build thread. It is still flying perfectly despite a few hard knocks :D
  20. 3dNater

    The 3DRCForums -Discuss Anything Thread-

    Yea Xpress... sorry to see that!
Top