• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Bbcorvette18

    Joe Smith quits 3DHS!

    He flat out said he wanted to fly more and not deal with the business side of the hobby. What's so hard to understand about that?
  2. Bbcorvette18

    Joe Smith quits 3DHS!

    Sounds like he wanted a break from the business aspects of the hobby and get back to flying more
  3. Bbcorvette18

    30% Pilot Carbon EDGE Build & Discussion

    Are those in the wing pocket? I assume they are but its hard to see
  4. Bbcorvette18

    30% Pilot Carbon EDGE Build & Discussion

    Don't forget the free replacement wood Pilot offers for the cost of shipping
  5. Bbcorvette18

    Pull Pull Rudder slack/slop

    This planes been used and abused for a couple years the motor has over 85 gallons of gas through it the airframe has atleast 400 flights. Ive put about 50 flights on it without touching a thing. Got most everything. Buttoned up gonnago through and get max throws from everything and then setup...
  6. Bbcorvette18

    Pull Pull Rudder slack/slop

    Yea I think I'll try to cross them and see if that takes up any more the slack. I have a feeling I'll be getting some stuff from Aztech soon. While messing with this one of the motor bolts fell out of the firewall too LOL guess its telling me to go over everything
  7. Bbcorvette18

    Pull Pull Rudder slack/slop

    The servo is fine. Thats all in the wires. They must of stretched a decent amount when I ripped the rudder off. I stopped putting pressure on the rudder when the servo started to hum and watched to make sure the arm wasn't moving. The pull pull wires are not crossed over. But the geometry looks...
  8. Bbcorvette18

    Pull Pull Rudder slack/slop

    This is after adjusting the rod ends more or less as far as I can go. It was at least twice as bad before adjusting. http://youtu.be/6uYP72dBfXE
  9. Bbcorvette18

    Pull Pull Rudder slack/slop

    So this is my first time playing with a pull pull setup. I noticed today that I have quite a bit of play with the rudder before the servo moves. Obviously this is bad. My question is how much "slack" if any should there be?
  10. Bbcorvette18

    Redwing Elite 50cc Slick 540 (new scheme)

    More purple but yea lol. I wanna get something different then the sbach tho. I'd really like to see a light yak 54 from redwing. But a slick or extra in orange n purple I would jump on given the funds are available
  11. Bbcorvette18

    Redwing Elite 50cc Slick 540 (new scheme)

    I'd jump all over something with the color combo of purple and orange. Preferable as close to House Of Kolors Tangelo and Burple lol
  12. Bbcorvette18

    30% Pilot Carbon EDGE Build & Discussion

    Yea that makes since ive got 3 1100 a123s in my 30% sbach but im thinking about jumping up to twp 2300s and a tech aero
  13. Bbcorvette18

    The Knife Edge Spin

    I meant to say down elevator. I think up on the stick and usually say the wrong thing especially when im tired lol from what ive read it was literally the blender inputs but it would teansition into a nice ke spin
  14. Bbcorvette18

    30% Pilot Carbon EDGE Build & Discussion

    4 2700mah a123s seems like major overkill
  15. Bbcorvette18

    Eugene Oregon 3D Bash & Monster Fest

    Loving it when its not windy lol. Even had it at the beach in some decent wind and impressed a bunch of people by doing simple tumbles and just keeping it in the air in those 20+ mph winds lol
View older results
Top