• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. S

    78'' Extra

    A question about wheel pant installation. On the side of the pant that has been cut for the axle to fit into it. It has to be opened up so I can get the wheel pant on the axle as it won't fit as it. Also, do I have to open it up enough so the wheel pant fits flush against the landing gear...
  2. S

    78'' Extra

    Thanks
  3. S

    78'' Extra

    Kevin I see you have the 40cc with the small plugs. How much clearance is there b/t the cowl and the plug boot? Do you think the 40cc with the CM6 angled plugs will fit?
  4. S

    78'' Extra

    I used the 7955's but just swithed to Savox. I had no problems with the 55's. I like the idea of going 7.2 volts so I don't have to run a regulator, that one of reasons I switched. I reseached a bunch of forums and people had good feed back. A guy of FG sells them for a good price...
  5. S

    78'' Extra

    Great...it's time build!!!!!
  6. S

    78'' Extra

    All the control surfaces are glued and hinged and the tail wheel is installed. . I fuel proofed the motor box and glued all the exposed areas I could get too. I'm going to wait to install the VVRC 40cc because I'm on the waiting list for the DA35cc and rumor has it shipping will be...
  7. S

    78'' Extra

    The VVRC 40cc Twin arrived today. Let the games begin.
  8. S

    78'' Extra

    GRYO, Did you get any more flight time on those 1270TG's? Really looking forward to hearing what your going to say about them!!!!! Chuck
  9. S

    78'' Extra

    FEDEX sent me notification the 40CC is on the way. Savox servos, servo extensions, Fromeco Wolverine are all enroute. Sounds like it's time to start the build. :bouncy:
  10. S

    78'' Extra

    The manual calls out for two 36" extensions for the stab servos and two 12" extensions for the aileron servos. No mention of the throttle servo extension probably because it depends where you install it.
  11. S

    Extreme Flight 88" Edge -- now with EXP sized horizontal stabs

    GYRO, I'm curious, what is the inside width of the cowl on the 88" Edge? Thx Chuck
  12. S

    78'' Extra

    I finally pulled the plug on the rest of the accessories I need to complete the build: Tonight I'm going to order five SAVOX 1270TG and I'll run them at 7.4 volts so I can get the 487.00in oz of torque. Also, I orderd five SWB servo arms (four @ 1.5 in and one 3.5 for the rudder). Servo...
  13. S

    Extreme Flight Owners Thread

    I'm hoping the DA 70 will be ready for the AMA show in Janurary of 2014.
  14. S

    78'' Extra

    Thanks. I ordered the 40cc angled plug version. Getting the Fourtitude tank, going with Futaba 9157's for the control surfaces. Yeah, way overkill but I'll move them to the EF 91" Extra when I'm done with this one.
  15. S

    78'' Extra

    Another question comes to mind! Will the 40cc engine with the straight plugs clear the cowl? I ordered the motor with the angled plugs; however, if the straight plugs clear the cowl, I'd go with that configuration because the spark plugs are so much easier to find.
  16. S

    78'' Extra

    GYRO, I'll take the tank off your hands Send me a PM with payment information and I'll get the money to you! Thanks CHuck
  17. S

    78'' Extra

    My 78" EF is scheduled to arrive next week. :banana: I'm going to use the Valley View Twin 40cc to haul the mail. :flyer: I'd like to buy a Fourtitude Tank for it but I'm not sure what size to get with the 40cc engine? :facepalm: I hear it's a thirsty engine. Do you have any suggestions?
View older results
Top