• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. xlr8tion

    Sugesstions for a 60" EF 3D plane

    Gary.... Please reread my post objectively please. The title of my post was based on the simple observation of the bottom of your info. Thank you to my Sponsors: Hitec, RedwingRC, BuddyRC, Demon Aero Then I was careful to apologize in case you might get offended as I knew you are...
  2. xlr8tion

    Sugesstions for a 60" EF 3D plane

    If I have to use a crow bar I will jam those 771's into the Seb and probably just fork the 224 for 4 5585's delivered for the Vyper . Have you had probs with the 770.not trying to save two dollars...it's just they are lo pro? Thanks! Greg
  3. xlr8tion

    Sugesstions for a 60" EF 3D plane

    I know your sponsor is HITEC Gary...so please don't take it personal. I just flipped when I saw the HS-8775 at 75 each with 125 torque and the 5585s for 70 with 236 torque.(I can get those for 52) Doug A sold me the ARF/Motor/ESC and 4 servos and said this... "Just to give you am idea of...
  4. xlr8tion

    Sugesstions for a 60" EF 3D plane

    If it is good for the "DOG" its good for me! Whoa DOG...You are running the 771's on your slick? IM SOLD! You must have had to get horns/hardware for the 23T spline as they come bare bones. Gary did you know Snow is a risk taker! Wow...You fly like a madman and those 771's have not...
  5. xlr8tion

    The 3DRCForums -Discuss Anything Thread-

    You sir are a PHILOSOPHER! Best post I have read on the issue. PERIOD. Next stop fiat currency collapse unless we take back our government physically-A "million man AR15/M4/AK march" as.... "The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants."...
  6. xlr8tion

    The 3DRCForums -Discuss Anything Thread-

    It's prophetic as we are "LIVING IT"...The Moochers and the Producers. The latter being the crowd here. Ayn Rand was raised in Russia so she knows socialism and communism. Mitt Romney may wear MOM PANTS and drive with his Dog on his car...But he nailed the 47 percent Moochers straight on...
  7. xlr8tion

    Sugesstions for a 60" EF 3D plane

    Hey guys..:ecstatic: They are 115/130 and 160 at 4.8/6 and 7.4.....I need a 13T spline set and decent horns and hardware. Emterprise...what's the dealio with the D770's...I read a few reviews and they center awesome and what probs did you see. PM me if they are new and wjat horns and hardware...
  8. xlr8tion

    Sugesstions for a 60" EF 3D plane

    Enterprise.... Electric only for me. I will sell it if i can not find servos for under 40 a pop. OK then... what XO servo for the Vyper and please someone. Can you please find a XO servo that will fit the Sebart? And is too much torque a prob? I don''t want to order from XO or RW and not...
  9. xlr8tion

    Sugesstions for a 60" EF 3D plane

    One of the guys that built this on RCG chimed in that one of the back servos(rud or elev) needed to be low pro (20 mm) And the 3152 he's talking about is 80 bucks. So the SEB manual is really confusing me. i use futaba s3152 servo.It is the stantard size but you need i servo low profile for...
  10. xlr8tion

    Sugesstions for a 60" EF 3D plane

    Which servos would you guys choose from Gyros links? I'm not a HUCKER. THANKS TO EVERYONE on the servo search. To clear any confusion here is what the SEBART 50E sbach manual says about the servos. Radio equipment: Minimum 5-channel radio system 4 standard or low profile...
  11. xlr8tion

    Sugesstions for a 60" EF 3D plane

    FOUND IT! Hyperion! A Servo that will work both on the 65" Vyper and PERHAPS the 61 Seb Sebach and can get the programable usb to servo cable for 17 bucks. http://www.rcdude.com/servlet/the-714/Hyperion-Atlas-Digital-Servo/Detail Has more torque and speed of the HS-5585MG-is fully...
  12. xlr8tion

    Sugesstions for a 60" EF 3D plane

    WHOAH...75 for those HITECSx 4...Yikes........I hope I can find a servo at half that cost as I will sell the ARF, and the A50-16s hacker and Castle 100 EDGE before I drop 300 on servos to finish that. I need to take a Xanax -Sebastiano Silvestri style. There has got to be an option that does...
  13. xlr8tion

    Sugesstions for a 60" EF 3D plane

    Thanks Enterprise! PM me when your are done with the 155A I will def buy it from ya and thanks again-especially for the servo info! Lifesaver you are..or dollar saver I should say! Greg
  14. xlr8tion

    Sugesstions for a 60" EF 3D plane

    Thanks guys.....The lastest dilemma is finding servos for my Sebart 61" which calls for JR PROPO DS9511 6.2kg/cm torque??? and those are 25.2x 19 x 40.5mm I think. Any idea what the Hitec or XQ Power servo equivs are to this? http://www.macgregor.co.uk/jrpropo/DS9511.htm Thanks guys and...
  15. xlr8tion

    JR 9511 servo equivalent in Hitec/etc.....For Sebart 61" Sbach 342 build..HELP!

    Hey Guys..... I am building a 61" Sebart Sbach 342 and they list some the JR PROPO DS 9511 servos all around. http://www.f3aunlimited.com/sebart-sbach-342-50e-gp-61-arf-yellow-black Here is the Airframe specs.... What is the Hitec equivalent to this JR servo which is spec'd by sebart for...
  16. xlr8tion

    Sugesstions for a 60" EF 3D plane

    Bought the Vyper 65" Enterprise...thanks for the info. Thats my next year plane. The WAF(wife acceptance factor) is LOW here and just spending 220 dollars for HS 5585 servos would send her off on a rant...Throw in 200 for a Motrolfly and someone is calling the COPS. I have a certain level...
  17. xlr8tion

    Joe Smith quits 3DHS!

    WHO GOT THEM? "Who is John Galt"
  18. xlr8tion

    What really gives a plane that "locked in" feel??

    Dead link.....
  19. xlr8tion

    Sugesstions for a 60" EF 3D plane

    Thanks man! Very few reviews of the Sbach.....Especially the Sebart 50e.......not many sold I guess. See Sbach 342s everywhere-but not Sebarts. Thanks......Greg
  20. xlr8tion

    Sugesstions for a 60" EF 3D plane

    Would you sell the Sebart to buy a 65" vyper? Shannon still has a 65 Vyper and I will be doing very little 3D....Both use the Hacker I have and I know I can sell the 58" EDGE....although I may keep that as they are hard to come by and AWESOME! Thanks for your advice.....Long to short.....Which...
Top