• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. 3dNater

    RedwingRC Pin and Flag with Hidden Dual Battery Redundancy Switch!

    You would have to have a separate lead for ignition that is separate from the lead/leads going to the rx with the isolation between the ignition lead and the rest of the system. That is why you sell power distribution boxes which I love love love :)
  2. 3dNater

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    No prob. For me... I don't get too caught up in wheels for a 25% 3d plane. My assessment ends once I decide whether they function well enough for a safe taxi, takeoff, and landing. I suppose I'm a little hillbilly in that respect. I do like wheel pants though!
  3. 3dNater

    RedwingRC Pin and Flag with Hidden Dual Battery Redundancy Switch!

    As the description does not make any statements about having any kind of noise isolation built into it for ignition I'd say it depends on how you get power to your ignition. If you are using a standard opto-kill switch that is designed to hook directly to a battery you should NOT have it in the...
  4. 3dNater

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    White rose wheels are said to be among the best. Whiteroseeng.com. expensive as awesome things often are.
  5. 3dNater

    3DHS and Extreme Flight Merger?

    Nice!
  6. 3dNater

    Las Vegas, Nevada 3DBash

    It is still on. I will be attending the club meeting to start getting everything organized.
  7. 3dNater

    Aerobeez 88" Slick 540 v2 (50cc)

    Woohoo! Fix that baby up and get her flying again ASAP! :D
  8. 3dNater

    Twisted Hobbys / RC Factory's Brand New 36" EPP FLASH NG, "Official Build Thread"

    Hi Jshie123 I believe foam tac glue was used exclusively for this build. You can use Welders the same way. The only down side to welders vs. foam tac is that the welders will start to yellow and become brittle over time.
  9. 3dNater

    DLE 35RA Muffler bolts

    I agree. That cowl has a ton of open space in the front. Like AKNick said, you could blank out one or both of the ears in the cowl. Blank them both unless you need one open to access the choke. Even then I would expand the size of the opening around the pipes. I was going to say double it...
  10. 3dNater

    Aerobeez 70″ Slick PRO Step By Step Build Guide

    Awesome standoffs Bushwacker. I wish I had a lathe... I have my eye on the table-top little lathe at harbor freight. My buddy has it and has turned some pretty cool little parts like that. What machine do you have?
  11. 3dNater

    AJ Laser 230z 73" Build Thread

    Nice work guys. I just read the whole thread up to this point. Lots of nice info!
  12. 3dNater

    The 3DRCForums -Discuss Anything Thread-

    Well, I'm doubting it actually needs a new wrist pin... I haven't inspected it yet. I'll use whichever one looks better. I viewed the other parts as much more critical. I can get the wrist-pin separately from tower if need be. To an extent I am trusting that the VVRC gang would have tossed...
  13. 3dNater

    The 3DRCForums -Discuss Anything Thread-

    So I am revitalizing a used DLE 55 I bought from an RCG forum member. This engine was used to compete in the King 50 in 2012. The previous owner said it seemed to be running hot and doing annoying things like dying in a hover. So after lots of flawless performance it is showing some signs of...
  14. 3dNater

    DLE 35RA Muffler bolts

    For muffler bolts I just have to add what I do as a non-certified and non-expert anything but this works for me. I picked it up from a 3dhs thread on rcg a few years ago and have been doing it ever since with good success. I have never had the muffler bolts come loose on my DLE35RA. The one...
  15. 3dNater

    Aerobeez 88" Slick 540 v2 (50cc)

    Ok, I'll put it this way... if you want to scrap the plane please send it to me. I"ll pay greyhound shipping :p
  16. 3dNater

    The 3DRCForums -Discuss Anything Thread-

    He doesn't have it anymore... and you are right, there could have been a new release since then. If they improved on what Kim had last year then it should be very awesome indeed!
  17. 3dNater

    The 3DRCForums -Discuss Anything Thread-

    Awesome plane Xpress. I had a chance to get a pull on Kim3D's last year and Kim put on a great show with it as a demo plane at our 3dbash.
  18. 3dNater

    Aerobeez 88" Slick 540 v2 (50cc)

    Swede there was no angle bracket in there?
  19. 3dNater

    3DHS and Extreme Flight Merger?

    I don't think we will find out too much until a plane treated with that tech is up for pre-order. Just my speculation...
  20. 3dNater

    The 3DRCForums -Discuss Anything Thread-

    Valleyviewrc.com is in Washington. Awesome service and they almost always have what you need.
Top