• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Yowzilla

    Demon cortex gyro

    That field sure looks like 114th. I noticed you are located in Keller so it must be. I flew there between 2006-2010. I am now way south Texas. In regards to gyro's , they are very difficult to describe because they are so dynamically adjustable. I am not directly experienced with this...
  2. Yowzilla

    Gp-61

    I got sick of taking the cowl off every trip to the field....Hope this is workable to allow me to twist the needles.
  3. Yowzilla

    standard and metric rant!

    Bonded washers I have won't fit in this specigic application. I use bonded washers on cowl screws and other areas. Thanks.
  4. Yowzilla

    standard and metric rant!

    I found a perfect screw for the wing tips on the 3DHS 92" EDGE. The screws that come with SAVOX servos have a huge head on them fit perfect in the wing tip holes. The only negative is that they are metal screws that can be victim to vibration where the nylon seam to deform a bit and hold...
  5. Yowzilla

    Gp-61

    Was the removal of the old arm difficult? I have a similar arm from Aztec but after researching it look like a pain to remove the stock on with the press fit.
  6. Yowzilla

    Blazing Star Products - DA 60 - 1.5" Aluminum Stand-off

    I have a this Blazing Star stand off that was mounted to a firewall but not flown or even had engine start on it. I will take best offer I get over the next few weeks. Paypal preferred... Thanks Charlie
  7. Yowzilla

    Gp-61

    What do you guys think of the sound of my GP-61 after 2 gallons? The movie below is the last two flights on a windy day. I am doing some slow, medium, and fast passes. Sorry for the wind sounds across the GoPro and the crappy setup of the headband. Most of the footage is pointing at the sky...
  8. Yowzilla

    3dhs 92" edge 540 !!!

    Here is a picture of mine from last Saturday....Fun day with wind gusts up to 32mph.... I added the vinyl with help from a "local" guy.
  9. Yowzilla

    standard and metric rant!

    What is the size of the nylon bolts for SFG and wing tips on the 92" Edge. I hate the flat head nylon screws...metric or english.. After installing only 2 times ...I am done with the impossible flat head..
  10. Yowzilla

    Show off your 3DRCForums swag

  11. Yowzilla

    3dhs 92" edge 540 !!!

    Some shots of the Edge from a quad with my GoPro on it...and yes that is a 24x10. We need to see a 24x10 and a 24x9 on GP-61 vertical drag race.
  12. Yowzilla

    3dhs 92" edge 540 !!!

    Here are some pics of the new vinyl... The sun is suppose to be out tomorrow when I plan to fly and I will take some better shots. A big thanks to the great guy that helped me!!!
  13. Yowzilla

    3dhs 92" edge 540 !!!

    Thanks for the reminder. I intended to do this earlier. Here is what I did with a split piece of fuel line and "Amazing goop" glue that some call shoe glue.
  14. Yowzilla

    3dhs 92" edge 540 !!!

    Sunday I had the choke servo break loose from the deck and pull the choke closed. The deck seamed to disintegrate. Most of it was still on the servo box. I came up with a simple method to add manual linkage to the GP-61 choke horn to open and close the choke. All I did was drill a hole in...
  15. Yowzilla

    3dhs 92" edge 540 !!!

    check out the used pop sickle sticks on the right side. This got me within 90%... I think 3DHS needs to list pop sickle sticks in required hardware to complete the build...
  16. Yowzilla

    3dhs 92" edge 540 !!!

    I just used large washers and needed to cut down two...You can kind of see in the pic below. This is what I ended up with from Craig cmala
  17. Yowzilla

    3dhs 92" edge 540 !!!

    Thanks...I wish I would have seen this sooner...I ordered on line from Bolt Depot Note to self check 3DRC Forums more often..
  18. Yowzilla

    3dhs 92" edge 540 !!!

    Yea I used the included wood spacer with the Edge kit and the spacers from the GP-61, but did not fly it this way. The ticket is with the custom standoffs from Craig. If you have the GP-61. If you have the DA I have an unused Blazing star stand off for sale..
  19. Yowzilla

    3dhs 92" edge 540 !!!

    I had a crazy day of flying on Saturday. Flight 1: 11 min of knife edge fun....choke servo broke loose Flight 2: 8 min of fun.....spinner flew off, after finding the spinner on field the bolt snapped off. It was a 12.9 hardness...wonder if it was too brittle? I may go with a SS bolt if...
  20. Yowzilla

    3dhs 92" edge 540 !!!

    Here is a movie I did with some build pictures followed by the maiden. https://www.dropbox.com/s/nz0wm7x5y2v7dp7/Edge%20Build%20to%20First%20Flight.mp4
Top