• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Orelelbaz6

    Give-a-way contest! Win a Hanger 9 Extra 300X

    It would be awsome to win and to get to fly this plane for the new 2017 season!
  2. Orelelbaz6

    Aerobeez 105" Extra 330 Reaper Build Guide

    Hey Everyone! Welcome to the build log for the new Aerobeez 105" Extra 330 Reaper. Aerobeez has done a great job with this kit. Aerobeez already cut down a few hours of the build but pre hinging all of you surfaces. My setup will be: -DLA-116cc Engine - (7) Hitec HSB-9380th servos all around...
  3. Orelelbaz6

    Aerobeez 78" Extra 330 Raiden Build Guide

    If you are using the DLE-40cc Twin you will need to use the pull-pull rudder servo method inside the fuselage to get the CG to balance correctly, not in the tail as show in the build log above. And as for your battery you will want it as far forward as possible then work you way back per your...
  4. Orelelbaz6

    Aerobeez 78" Extra 330 Raiden Build Guide

    Now locate your carbon fiber landing gear, wheel pants, gear cuffs, and landing gear accessory bag. Slide the gear cuffs onto the landing gear, make sue its on the correct way. The front of the landing gear is the flat side, the rear is a bit tapered as you can see in the picture above. The...
  5. Orelelbaz6

    Aerobeez 78" Extra 330 Raiden Build Guide

    Hey Everyone! Welcome to the build log for the new Aerobeez 78" Extra 330 Raiden. Aerobeez has done a great job with this kit. Aerobeez already cut down a few hours of the build but pre hinging all of you surfaces with exception to the rudder. My setup will be: -50cc Sized Engine - Hitec...
  6. Orelelbaz6

    Aerobeez 32" EPP Edge Build Guide.

    Ok, now that we have successfully glued in the landing gear rods we can begin gluing in the carbon fiber struts. Locate your carbon fiber rods and remove one of the rods to begin with. Now cut two pieces 1 inch in length. This will be your nose strut. Glue one side of the rod to...
  7. Orelelbaz6

    Aerobeez 32" EPP Edge Build Guide.

    Hey Guys! Aerobeez has just came out with a bunch of new airplanes including the all new 32" Epp Edge! My setup will be: -Turnigy 2204-14t -Turnigy 12amp esc -GWS 8x4.3 - Hitec HS-56 for Ailerons - Futaba s3114 on tail (I ordered HS-45s to use but they did not come in yet in time for the build)...
  8. Orelelbaz6

    NEW AEROBEEZ 78" Slick 540!!!

  9. Orelelbaz6

    NEW AEROBEEZ 78" Slick 540!!!

    Hey guys, this is the 78" Slick along side my 93" Extra. As you can see they are almost the same size! The rudders are actually the same hight! This is a HUGE 35-50cc plane!
  10. Orelelbaz6

    NEW AEROBEEZ 78" Slick 540!!!

    I had some Hitec HS-7954sh servos laying around. I am going to get a HS-7950th for the rudder (a hs-7954 would work just fine but i like having a 7950 around) i also need to get some Maxima receivers. Xpress
  11. Orelelbaz6

    NEW AEROBEEZ 78" Slick 540!!!

    Dont worry guys i will get a flight video soon! As i have said before i am in the process of switching engines so i am still waiting for my new engine to get here! I am also gonna try different servos so i am waiting for those as well. Il post more pictures when my new equipment gets here!
  12. Orelelbaz6

    NEW AEROBEEZ 78" Slick 540!!!

    Let me tell ya, on a 50cc this thing has tons of power! I might be switching out the 50cc with something a little bit bigger, just to prove how strong this new airframe is and to really push the envelope for your guys :o Flight video coming soon!
  13. Orelelbaz6

    Joe Hunt RC 3D FLY IN -- Pics & Vids

    Sounds like fun! I'll be there!
  14. Orelelbaz6

    Joe Hunt RC 3D FLY IN -- Pics & Vids

    This was a great event! Cant wait till next year! Sent from my iPhone using Tapatalk
  15. Orelelbaz6

    For Sale (4) Jr 8711 and (1) Jr 8911 HV

    I am selling 4 Jr 8711 and 1 jr 8911hv for $90 a piece or $95 with 1.5in arm or 3in double sided arm or all 5 servos for $440 or with the arms for $470. These servos are currently at horizon hobby getting serviced so i can take a picture of them when they come back.
  16. Orelelbaz6

    Wanted JR 8711 and 8411 servos

    I have 4 8711 and 1 jr 8911hv i could sell for $90 a peice?
Top