• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Nutball

    Middle Tennessee Swap Meet 11/5/16

    See the flyer.
  2. Nutball

    Xoar sword 24x8

    This was flown one day, a different color prop was chosen to be kept. Xoar sword 24x8 with DLE 61cc bolt pattern. SOLD SOLD SOLD SOLD SOLD
  3. Nutball

    For Sale FS/TRADE: Motor & ESC for 40-50% airplane $550

    $550 WB10640 95KV motor in new/tested scratch & dent working condition. This is one of the biggest motors for rc aircraft and will fly a 35-50lb 3D airplane or 40-50% scale. This is one motor of a few that were not padded well enough when I received them, so they bumped around and caused very...
  4. Nutball

    JC Super 38x12

    Lightly used hardwood JC Super 38x12, great thrust, never flown just bench run, 12mm shaft hole, and 30mm diameter 6 bolt for M5 bolts. The tape on the prop is for balancing, it is placed on such that it shouldn't come off in flight. I don't know for sure, but this might fit a hacker A200...
  5. Nutball

    JC 36x14 or others

    I'm looking for a good deal on preferably a JC 36x14 or: 33-35x14 might consider 36x12 3 blade 32x14 up to 36x12 I'm looking to spend around $40-70 or so depending on what you have I might consider a 43x8 for the fun of it
  6. Nutball

    28x12 & 30x10

    Is this a duplicate thread of the other prop swap thread further down the list? Used once each, balanced, 28x12 and 30x10 props with drill pattern that should fit any turnigy motor with 12mm shaft (12070 and others). You could probably redrill them for a different motor, I might be able to make...
  7. Nutball

    New heavy duty 2" metal arms for Hitec

    New heavy duty metal servo arms that fit Hitec servos except for the 8000 & 9000 series. The holes are tapped for metric screws, but easily drill to fit a non metric screw, spaced 1", 1.25", 1.5", 1.75", 2" $13 for 2 $24 for 4 $45 for 8 $100 for 20 make offer
  8. Nutball

    Spektrum Ar8000 DSMX

    Spektrum Ar8000 DSMX Range checked to about 60 meters $68
  9. Nutball

    New Hitec metal servo arms

    $10 shipped for both arms. Should fit all sizes micro (80 series) and larger except 8000 and 9000 series.
  10. Nutball

    10 metal arms for Futaba spline

    I have 10 arms all new, may need to be drilled to fit non metric screws. The benefit of a futaba spline twin arm is if it doesn't center right one way, you can turn it 180 degrees for a better centering option. Pre drilled holes are spaced from the center 1.25", 1.5", 1.75". Should fit most...
  11. Nutball

    (2) Spektrum 6040 titanium gear coreless servos 167oz

    2 lightly used spektrum 6040 titanium gear servos, I think rated for 167oz @ 6v 0.08s $75 for both I think these have Futaba spline if that helps any.
  12. Nutball

    For Sale (4) New Hyperion DS20 UMD digital 325oz

    4 New Hyperion DS20 UMD digital metal gear double bearing Low voltage servos. I have not mounted all of them yet, but decided to use a different servo. I test lifted 15lbs with one of these. I made one voltage reducer to be able to use them with a 2s lipo power source, I can make another if you...
  13. Nutball

    (6) NEW XQ-Power 4116D HV digital coreless 200oz

    6 New XQ Power S4116D digital HV metal titanium gear coreless servos, one was mounted, one long plastic arm drilled. Speed: 0.14 sec/60 ° at 7.4V 0.12 sec/60 ° at 8.5V Torque: 14.8 kg-cm (205 oz-in) at 7V 16.9 kg-cm (235 oz-in) at 8.5V $40 per servo or $230 for all They have FUTABA...
Top