• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. gyro

    Krill 35% extra 330sc

    Jacob is still in search of a large airframe that can stand up to his flying style & abilities! The poor Krill doesn't know what it's in for...
  2. gyro

    Gp-123

    Damn :(
  3. gyro

    Gp-123

    Got some standoffs from customstandoffs that I had made for the DA120, hopefully they're the right size.
  4. gyro

    Gp-123

    Guess id better finish my 104 soon
  5. gyro

    Tulsa Oklahoma 3D Bash

    Possibly coming up for Friday flying... When will you get in?
  6. gyro

    EG 120cc Slick By Aztech Aeromodels

    get those wing servos installed and setup
  7. gyro

    EG 120cc Slick By Aztech Aeromodels

    Lol
  8. gyro

    Hot off the truck! DLE-61's are here!!!

    Tim, can you please give an update on where you're at with your motor so far? (Fuel used, rpm, current prop, etc) Thanks!
  9. gyro

    Eugene Oregon 3D Bash & Monster Fest

    Sadly, no... But If I'm ever stationed in Vegas again (hoping for it) then watch out!!!!
  10. gyro

    The EXTRA 300 EXT Build Thread

    You might need to re-title your video Maybe it's like Matt said, your programmer got fried somehow.
  11. gyro

    Discussion Choosing an air frame----frustrations!

    Nope, you should be fine. I've had good luck using the gecko with same setup as yours, as well as two different 30cc setups with no problems; one four servo, and one five. The gecko is solid.
  12. gyro

    The EXTRA 300 EXT Build Thread

    I just got off the phone with my friend Garret AltitudeHobbies who is one of the ZTW retailers. He's going to drop by the thread and see if he can help.
  13. gyro

    The EXTRA 300 EXT Build Thread

    Who did you buy it from?
  14. gyro

    The EXTRA 300 EXT Build Thread

    Have you tried powering up the ESC with the battery, then connecting the short input wire to the programmer, then powering on the programmer.
  15. gyro

    12S power systems ideas and options

    I haven't recharged the packs as that was the last flight on them for the day. They measured 3.74 +/- .01v per cell across all 12 cells. As soon as I have time, I'll run a charge then a storage and let you know. What I can say, is that he wasn't shy on the throttle, and we still got a 6...
  16. gyro

    The EXTRA 300 EXT Build Thread

    On the ZTW HV programming: 1- use the shorter of the two servo wires out of the ESC 2- power the ESC with a LiPo 3- still may need to power the programmer with a battery or BEC Everything will work fine :)
  17. gyro

    GWS P-38 Build Log and Review

    Congrats on completing the build, the plane looks great! And congrats on the addition as well!
  18. gyro

    The EXTRA 300 EXT Build Thread

    Sounds like your dropping the voltage to the rx below minimum when you move the controls. Hook up a watt meter between the ESC wire and rx to confirm.
  19. gyro

    12S power systems ideas and options

    Just over 18 by my calculations, will get it on a scale next time out.
  20. gyro

    Aerobeez 90" Extra 330SC (50cc)

    In all the excitement yesterday I forgot to get out the fish scale. I figure about 18.2 lbs, but will measure for sure next time.
Top