• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. Xpress

    GSN GIVE-A-WAY Hangar 9 35% Extra 300X Assembly

    Hmm your 120 is drinking gas... Mine new 120 that have yet to set the needles on doesn't use that much fuel, I can get about 8-10 minutes of hard 3D and manage to use only slightly more than half a tank. Both my 120's are like that.
  2. Xpress

    Cool The I'm going out flying thread 2017

    Was an overall great weekend this weekend. Got my Edge all dial'd in as good as it's gonna get, now it'll be parked until TriCities at the end of the month :) Also it was National Model Aviation Day on Saturday so of course my club held a fun fly event to raise money for a local charity.
  3. Xpress

    The 'What did you do in your workshop tonight?' thread

    Super jealous, I love that scheme.
  4. Xpress

    The 'What did you do in your workshop tonight?' thread

    That's what I've used with my DA70, both my DA120's, and my ZDZ180 without a problem. No filtering, just a straight pass through. I filter my fuel twice before it enters the tank.
  5. Xpress

    Sport The Behemoth Yak gets a Behemoth Brother/129" Pilot Yak (2)

    What, did you stop working on this??
  6. Xpress

    Cool The I'm going out flying thread 2017

    They'll fit in far better at the Tri Cities Huck that I'll be at August 31-Sept 3 :D
  7. Xpress

    Cool The I'm going out flying thread 2017

    Video from this weekends shenanigans:
  8. Xpress

    Cool The I'm going out flying thread 2017

    What a fun weekend. Went out and 'test flew' the new Multiplex Easy Glider 4 RR, took the girlfriend out and let her get some more stick time on her Multiplex Heron, and of course got some more stick time in on the Pilot Edge. I've got the CG on the Edge just about where I want it :)
  9. Xpress

    The 'What did you do in your workshop tonight?' thread

    I have the smallest straps PureTech makes (2" ID) and they are still too large, I have some other velcro straps that should work, come to think of it... o_O
  10. Xpress

    The 'What did you do in your workshop tonight?' thread

    Worked on these 2 ladies last night. First up, the Yak. Still waiting on my new parts from Tony at Pilot RC but in the mean time I still had some stuff to do. Slapped the HS-7955TG back in the wing that I bent a gear tooth on, then got to work on opening the bottom fuselage exhaust vents. I...
  11. Xpress

    GSN GIVE-A-WAY Hangar 9 35% Extra 300X Assembly

    I asked Colton about the special tuning instructions and he said it's a special carb for those with can issues, does not pertain to most of us.
  12. Xpress

    GSN GIVE-A-WAY Hangar 9 35% Extra 300X Assembly

    I honestly don't know why some guys will fire their engine up and then immediately run it wide open before any heat has been generated. This is the worst thing you can do for an engine, especially these 2 stroke air cooled engines. They need to have heat in them before turning the RPM's. I fire...
  13. Xpress

    The 'What did you do in your workshop tonight?' thread

    Well I spent a few minutes inspecting the servos on my Yak post-crash to make sure they were all good, was working the right panel when suddenly the aileron locked in place at about 30* of travel :eek::eek: Moved the stick on my Tx back out and they free'd right up. The inboard servo seemed to...
  14. Xpress

    Cool The I'm going out flying thread 2017

    Sorry, I was mistaken, it's the same V3 but with different schemes other than the Hamilton scheme. http://pilot-rc.com/ProductShow.aspx?id=128 Some of the original Edge 540's had flat stabs. (borrowed from alamy.com, hope they don't mind).
  15. Xpress

    Cool The I'm going out flying thread 2017

    So flat stabs?? :p
  16. Xpress

    The 'What did you do in your workshop tonight?' thread

    Straight servo grommets don't allow for proper servo frequency modulation in the case set which can transfer irregular undulating vortexes through the brass eyelet stabilizers via mounting screws and cause airframe sinusoidal wave like motions during high-G deposits upon the servo itself...
  17. Xpress

    The 'What did you do in your workshop tonight?' thread

    Decided that a 3" offset arm just wasn't enough on the Edge, so I went to a 4.5" offset arm. Now just to move my rx packs behind the wing tube and I think this airplane will be dial'd :)
  18. Xpress

    Cool The I'm going out flying thread 2017

    You can still buy it directly from Pilot. The new V4 coming out looks really sweet though.
  19. Xpress

    Cool The I'm going out flying thread 2017

    Tried a CG change with some lighter batteries in the Edge today and found that it flies better. Going to mount my batteries behind the wing tube.
  20. Xpress

    Sport The Behemoth Yak gets a Behemoth Brother/129" Pilot Yak (2)

    To follow up on the current draw thing, an individual servo probably won't draw 75-150 amps (just take my word for it ;) ). A single servo plug is capable of 3 amps continuous current, and can handle upwards of 10 amps burst for a few seconds. Some people have tested some plugs to 10 amps...
Top