• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Windshield
  2. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Remember the old days making control rods out of 1/4" balsa, 2-56 threaded rods wrapped with thread and soaked with CA?
  3. TonyHallo

    Scale Sig 1/3 Scale Spacewalker

    Hey Randy, welcome to GSN! A build would be great. Wonder if the 38 cc will be up to the task? I image the recommended engines on the SIG site are glow?
  4. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Is that a solid rod? What control?
  5. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Are you missing a radius where the fuselage meets the fin? Looks like in the above photo.
  6. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Quick update on the carburetor modification. The clone carb I bought had a 17MM choke diameter, I found a 17 mm velocity stack Ebay for $8 so I bought it. The original carb has a 9 mm diameter velocity stack. Looking at the 17 mm velocity stack on the new carb with the choke open just looks...
  7. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Sanding away on the cowl and finishing up the stabilator. Turned 3/4" dowel down to fit inside the cf tube on both ends, these were glued in with thin CA. The stabilator tips are fitted with 1/4" lite ply plates, an additional piece of 1/4" lite ply was glued over the socket area, a 4-40 bolt...
  8. TonyHallo

    The 'What did you do in your workshop tonight?' thread

    Wonder who came up with the idea? It sure does work great.
  9. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    From Google AI; " A Walbro spiral diaphragm kit's primary benefit is its enhanced durability compared to traditional rubber diaphragms, offering resistance to fuel deterioration, ethanol damage, and extended lifespan, making it ideal for applications with modern fuels; however, potential...
  10. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Need to get the cowl ready to mold. The oval below the engine centerline where the headlamp is located was off to the left side by 1/8", cut it free and moved it over to the center According to Aircraft Spruce the 140 has a 12" diameter spinner, 30% of 12 is 3.6" 3 1/2" is close enough. The...
  11. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    The genuine Walbro WT 962 carb arrived, since it was purchased as a replacement for a RCGF engine it already has airplane style control arms. Put the spiral diaphragm kit in it, checked the pop off pressure, 28 psig release, 18 psig reset, good to go. Ordered material from McMaster Carr to...
  12. TonyHallo

    Scale BUSA Super Cub

    I'd do the envelope method, Chip from F&M recommended it to me many years ago.
  13. TonyHallo

    Scale BUSA Super Cub

    Here are the seams referenced in the Stits manual, see the envelope requires only a single stitch. I think on the next one I might try the seam right above the single stitch, the modified folded fell in two steps
  14. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    I must say it works better than I had hoped. Did a little work on the engine. The intake had 1 10.25 mm throat, the new carb has 1/2" bore (13mm). Ordered 1/2' ball end mill to open the throat to 1/2",took longer to set up the piece on center than to do the mill work. Should have taken a...
  15. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    Completed the anti-servo tab control linkage. Used DuBro heavy duty rod ends, the connecting link is 3/32" G10 because that's what I had on hand. The upper link is K&S 3/16" x .049 aluminum tube tapped 4-40 and screwed into a 4-40 Tee nut with a 3/8" large washer to spread the load. Here's a...
  16. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    I believe it is a J3, the photo was taken at the Piper museum.
  17. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    When you open the lid, you will know whether or not to throw it away! The paint for the Super Cub was purchased in 2008, worked just fine in 2024!
  18. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    The spiral diaphragm kit arrived. Comes with new diaphragm, level and setting gauge, the gauge drives the cost up, you can buy the kit without the gauge. Unlike other Walbro carbs, the lever is set .055" above gasket surface. Look closely on the bottom of the gauge under the WALBRO is the...
  19. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    Ok I understand, sorry for the interruption, build on!
  20. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    I'm only guessing here but I believe the plywood is too large. In the photo below there is a flange that the rear window fits into, I would image the fabric was glued to the flange and glued into the flange as well, than a reinforcing tape was applied on top the fabric over the the flange...
Top