• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

The 'What did you do in your workshop tonight?' thread

AEROSHELDON

70cc twin V2
Used some fiberglass cloth and finishing resin to strengthen my wheel pants on my Edge. Also got the aileron servos matched perfectly... very happy with them. Also went flying today.. Good day!
IMG_0817.JPG
IMG_0824.JPG
IMG_0825.JPG
IMG_0817.JPG
IMG_0824.JPG
IMG_0825.JPG
IMG_0826.JPG
IMG_0827.JPG
IMG_0829.jpg
 

pawnshopmike

Staff member
Finally finished up my charger case upgrade. Last thing on the list was to solder up some longer balance board leads for the X4 Eighty. I tried to cheat by buying some ready made extension but the were to long and I didn't like the bulky connector in the middle. So I cut out the connector and soldered them together. Them I slapped some snakeskin on them.

image.jpg


All done!
image.jpg


Now I just need some flying weather. Weather was pretty good yesterday but I had to work. Then today we hit a balmy 68 degrees but it was way to windy for flying.:(
 

pawnshopmike

Staff member
I didn't let the warm weather today go to waste though. Built a couple more raised bed frames for the garden. Guess you could say I got spring fever! I still need to level them out and stake them down but you get the idea.

image.jpg
 
Top