BalsaDust
Moderator
Looks good. I would say though where the two sticks come together at an angle I would put some sort of gusset in there to add a little strength.
Sport 30% Edge 540 Pete Marshall Plans with Laser Cut Short Kit
- Thread starter Bluepilot2003
- Start date
Bluepilot2003
70cc twin V2
Thanks for the tip!
pawnshopmike
Staff member
@rcpilot82
Don needs a price.
@Donairplane
The PM on this forum is called conversation. Click on your name at the top of the page, then click on conversation and then click "Start New Conversation".
rcpilot82
30cc
Check your E-mail. I am just getting caught up on things today, had a very busy weekend.
Donairplane
30cc
Thanks for your help. I can do that@rcpilot82
Don needs a price.
@Donairplane
The PM on this forum is called conversation. Click on your name at the top of the page, then click on conversation and then click "Start New Conversation".
.Don
pawnshopmike
Staff member
You bet.Thanks for your help. I can do that
Don
Here's a link to lots of tips and tricks for surfing GSN.
http://giantscalenews.com/forums/site-tutorials-requests-bug-reports-etc.10/
Donairplane
30cc
Rob,
Thanks for the fast response. Plans look great. We need some cross sections to sandwich in foam for a cowl plug, any cad guys willing?
Don
Bluepilot2003
70cc twin V2
Well, I glued the sides to the motor box after I was satisfied with the fit. My biggest qualm has been the fit of F-3. So I did it without F-3 in at the time. I don't think I could have it any more square than it is. Though I don't have the phenolic tube, the wing tube itself did a very good job of verifying how well the pieces fit together. I used epoxy for this step.
Attachments
rcpilot82
30cc
If I could find the time I started on a cowl plug for the edge and the cap. they are both about 60% done. Just don't have time like I used to.
Donairplane
30cc
Rob,
I'm willing to pay for the cross sections if that helps. I know about the time thing I was self employed.
Don