Scale Nelitz 1/3 scale Cub build
- Thread starter dhal22
- Start date
dhal22
GSN Sponsor Tier 1
Busy alway, I’m now at 12 employees. Every evening seems to slip away with late afternoon/evening work. Family duties. I flew the hell out my 35% Yak on Sunday. Someone talked my into trying knife edge loops and I spent most of Sunday afternoon working on the loops then trying to do a double loop.
I’m somewhat limited with evening work as Polytak and MEK fumes are NOT tolerated by the wife. I don’t know how even 10 minutes of fumes work their way upstairs but they do. I might set up a table on the patio and take the plane outside soon.
I’m somewhat limited with evening work as Polytak and MEK fumes are NOT tolerated by the wife. I don’t know how even 10 minutes of fumes work their way upstairs but they do. I might set up a table on the patio and take the plane outside soon.
TonyHallo
640cc Uber Pimp
Yes that is the problem with the Stits system and the main reason I used Stewards System on the Champ. My wife was a little disappointed when see saw the Dexter Morgan cut room going up. I had it up for a couple of weeks when I painted the Super Cub Fuselage.
Last edited:
TonyHallo
640cc Uber Pimp
I do it similar, I omit the first coat of brushed on PolyBrush. Then spray on the fill coats of PolyBrush. The use of PolyBrush allows for heat smoothing the taped areas, I would image PolyTac can be heat smoothed as well, don't know. I get better results using parchment between the iron and taped area when heat smoothing.
