• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Krill 39% Ultimate 300KS Assembly And Paint

49dimes

Damn I'm hungry
Not really, the Pilot and Extreme Flight 120cc planes in carbon are still $1150.

That's good to know. But I was looking at 3DHS, EF and AJ air frames with the carbon in the 90+" or 60/70cc class and the offerings on them was about 900 big ones to my door. My old Pilot edge was 675 to the door.
 

Snoopy1

640cc Uber Pimp
Heavy cloth, 7-8oz I would think, then whatever thickness balsa in between. I can't find 1/8" end balsa. YouTube it.
What do you mean end balsa. If I understand the balsa in between the carbon is end grain. That is difficult to do, you need a log and then cut it up glue it together and sandwich it all together. That work and tough to do but it will be very difficult to compress., no wonder it is so expensive. Thanks for that. As you said the balsa is the hard part to get.
 
Last edited:

Rik Boerrigter

New to GSN!
Hey hello, I'm also working on the ultimate! I picked up the krill at the factory in the Czech Republic (1000km) but it was worth it! also bought a rudder tray servo holder via krill was in the option list. so I do not place the servo in the bottom of the hull. the servos in the wings I glue with a frame of esprit models and much further I am not myself yet. greetings from the Netherlands and Google translate
 

Attachments

  • 416D1420-304F-4601-B9A6-553A58A5FD87.jpeg
    416D1420-304F-4601-B9A6-553A58A5FD87.jpeg
    1.6 MB · Views: 345

pawnshopmike

Staff member
Hey hello, I'm also working on the ultimate! I picked up the krill at the factory in the Czech Republic (1000km) but it was worth it! also bought a rudder tray servo holder via krill was in the option list. so I do not place the servo in the bottom of the hull. the servos in the wings I glue with a frame of esprit models and much further I am not myself yet. greetings from the Netherlands and Google translate

Very cool.

Welcome to GSN!
:welcome:
 

Snoopy1

640cc Uber Pimp
:welcome::welcome:
Hey hello, I'm also working on the ultimate! I picked up the krill at the factory in the Czech Republic (1000km) but it was worth it! also bought a rudder tray servo holder via krill was in the option list. so I do not place the servo in the bottom of the hull. the servos in the wings I glue with a frame of esprit models and much further I am not myself yet. greetings from the Netherlands and Google translate
Welcome to GSN. Long drive to get an aeroplane but it is a nice plane. Lived in Holland for a while but went back home after a while. One question were in Holland do you fly that size plane. Is the sport popular in Holland.
 
Top