• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Moki 250cc 40% Sukhoi SU-31

stangflyer

I like 'em "BIG"!
Man o man if you bought one of those you be the man. King of GSN for a long while. Let’s face it would just turn that mustang of yours in to the ultimate mustang to have. You cannot do better than that.
Truth is, I looked at the 150 last night. It's really not that bad of a price. The more and more I think of it, the more I am convinced that I really want to have one up front pulling that Mustang around. Especially if I can get my hands on a prop reduction Drive. To make this mustang a fully scale size, it needs to have about a 33 inch prop. It does not look like that will be much of a problem for the reduction Drive. Simply reduce the pitch a degree or two and add it to diameter.
 

acerc

640cc Uber Pimp
I am pretty sure that is what mine was. Do you know what your wingspan is? I believe mine was 96.
I do believe it is 96 inch. I thought of selling it a time or two, even listed it for a day. But I had wanted one for quite some time when this kit came along and I know with every fiber of my being I would seriously regret letting it go. Had a few smaller ARF versions over the years but never a good sized one. I will get to it one day!!!
 

Snoopy1

640cc Uber Pimp
Truth is, I looked at the 150 last night. It's really not that bad of a price. The more and more I think of it, the more I am convinced that I really want to have one up front pulling that Mustang around. Especially if I can get my hands on a prop reduction Drive. To make this mustang a fully scale size, it needs to have about a 33 inch prop. It does not look like that will be much of a problem for the reduction Drive. Simply reduce the pitch a degree or two and add it to diameter.

If I am not mistaken Kolm build a reduction drive for it if they do not my bet is on Tony Clark he deals with Kolm and he will be able to help you out.
https://www.toni-clark.com/index_en.htm
 

acerc

640cc Uber Pimp
Truth is, I looked at the 150 last night. It's really not that bad of a price. The more and more I think of it, the more I am convinced that I really want to have one up front pulling that Mustang around. Especially if I can get my hands on a prop reduction Drive. To make this mustang a fully scale size, it needs to have about a 33 inch prop. It does not look like that will be much of a problem for the reduction Drive. Simply reduce the pitch a degree or two and add it to diameter.
You may run into a space problem with a gear reduction system on a Mustang. I can not find a recommended prop size for the Kolm but keep in mind the four strokes have much more torque than a two stroke and turn a larger prop because of it. The Kolm being a 150 is comparable to my 170, I say that due to the added cylinder, of which I turn a 32x12x3 prop. But if a lower pitch was used the diameter could be enlarged. Toni Clark deals with these engines quite a bit and does not mind a phone call as I have spoke with him numerous times, I highly recommend calling him..
 
Last edited:
Top