• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Yippee! What the postman brought

HRRC Flyer

GSN Sponsor Tier 1
The GP61 is the same also.
@HRRC Flyer if you end up buying a new spinner, Tim at Northwest RC will drill it for you if you get it from him. He just did the prop and spinner I got from him the other day. I even bought a new DA120 drill guide from Taildragger and haven't had to use it.;)
Hey Doug,

I saw your post on the spinner you got from Tim at Northwest RC. I just went on his site and the 3.5" carbon fiber Falcon spinners are out of stock so I put my name on the waiting list. I just ordered a drill guide for my DA and it should be here next week, but I may just get Tim to drill the backplate for me like you did. Thanks for the tip, Buddy. . . . . . . . :way_to_go:
 

Jetpainter

640cc Uber Pimp
Hey Doug,

I saw your post on the spinner you got from Tim at Northwest RC. I just went on his site and the 3.5" carbon fiber Falcon spinners are out of stock so I put my name on the waiting list. I just ordered a drill guide for my DA and it should be here next week, but I may just get Tim to drill the backplate for me like you did. Thanks for the tip, Buddy. . . . . . . . :way_to_go:
I knew the prop was going to come with a 2 o'clock drill, but the spinner being drilled was a complete surprise.:)
 

dhal22

GSN Sponsor Tier 1
Not the postman but the seller delivered for me this week. I've been texting a seller about a plane for sale but hadn't found the time to make the 6 hour round trip. Turns out he was headed right past this weekend so he delivered to me. Very nice of him.... :yesss:
 

stangflyer

I like 'em "BIG"!
Hey Doug,

I saw your post on the spinner you got from Tim at Northwest RC. I just went on his site and the 3.5" carbon fiber Falcon spinners are out of stock so I put my name on the waiting list. I just ordered a drill guide for my DA and it should be here next week, but I may just get Tim to drill the backplate for me like you did. Thanks for the tip, Buddy. . . . . . . . :way_to_go:
I'm glad you got what you needed ordered. Sorry it took me so long to reply. I did have an extra drill guide, but no spinners that would suit your needs. Unless you want to use one of my Behemoth CF 5.5" spinners. LOL. Tim is the best. He will most definitely take care of you.
 

dhal22

GSN Sponsor Tier 1
Awesome. But we’ll be needing pics! :big_yes:

Here they are. Made you wait on them. All receipts, DA120 still under warranty, not a spectrum fan but did not want to lose the neat setup and programming and the time getting back in the air. Plane , radio, wing bags delivered for 2 grand. :)

20180819_201336.jpg
20180819_201756.jpg
 

Snoopy1

640cc Uber Pimp
Not the postman but the seller delivered for me this week. I've been texting a seller about a plane for sale but hadn't found the time to make the 6 hour round trip. Turns out he was headed right past this weekend so he delivered to me. Very nice of him.... :yesss:
No picture it did not happen.
 
Top