• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Dual BuildNew PAU 35cc Edge and 35cc Extra

Tseres

150cc
Went flying today but it was to windy to fine tune the Extra. Good news is that I can fly it the way it is. It's not far off. Made 2 flights that was enough for today.
Then I worked on Kent Horsmans Edge. Glued in the hinges with Epoxy on one side only and also epoxied in the control horns. This is the slow part.

IMG_2318.JPG
IMG_2319.JPG
IMG_2320.JPG
IMG_2321.JPG
IMG_2322.JPG
IMG_2323.JPG
 

TBeghtol

New to GSN!
My 35cc Extra will arrive tomorrow...

While (im)patiently waiting I am pondering servos, servo arms, etc.

For a strictly IMAC practice airplane, what would be recommended servos for elevator, aileron and rudder?
Also mini or standard size servo for throttle?

Next, what size is the attachment on servo arm end of linkages? 2mm, 3mm, etc?

What length of servo arms for control surfaces?
 
Top