• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!
  • Unless you are a paid advertiser NO more posting advertisement in the individual vendor forums. You may post in the Manufacturer's Announcements section only but only ONCE a month unless your a paid advertiser.

Brand New Twisted Hobbys MXS-C Mini Designed by Cody Wojcik.. Official Build Thread

AKfreak

150cc
Video of my first flight with the MXS-C mini (dont expect much ;-))

[video=youtube_share;qETuEdGXWPg]http://youtu.be/qETuEdGXWPg?list=UUCa6sk3mAf6dT4wY9TYaNNg[/video]

Looking great Tom, love the pictures and videos all are extremely well detailed and very well organized!

Brad
Twisted Hobbys
Thank you fine sir.

Great looking Build Akfreak..! Grats on another awesome design Cody..!
.
cdee
.

Thanks for the kind words. AKf
 

Benton3dflying

New to GSN!
Nice flying Akfreak! Those snaps were insane. I agree with you that the roll rate is enough for any pilot. Wish we lived closer so we could fly together. Looks like awesome weather there, wish it was like that in NC this time of year. Looking forward to flying indoors with the mini soon.
Benton
 

AKfreak

150cc
Yeah, I would love to fly with you. You are an amazing pilot. The weather here is nice right now. The wind can be a bit too much, but i'll deal with the wind vs the cold any day.
 

Benton3dflying

New to GSN!
AKfreak Hope I can see you at an event someday soon. Have you thought of coming to Joe Nall in May some year?
Only Fine Helis I like close to Charlotte maybe we will see each other soon at a Carolina event.
Benton
BTW I flew at the flying club yesterday when the wind was blowing 15 mph. No one would fly so I pull out the mini. Forward speed at full throttle was only about 5 mph but it did handle the wind. Funny a plane that only weighs 3 ounces will fly when nobody else wants to fly.
 

hone

150cc
Got mine ordered yesterday. Can't wait to get it flying. It'll actually be my first of the mini series.

Great job on the build thread, Tom. Came out great :) Looks like it rolls insanely fast!

Awesome flying, Benton. I always enjoy your videos.
 
Last edited by a moderator:

JTI

30cc
Got email notice and ordered one. Cody designed the great Crack Laser Lite and the MSX-C 32" that I fly all the time.
Had to have one for the indoor season. I doubt it will get built for Saturday at 4 Seasons Golf Center but ready for the next session.
 

AKfreak

150cc
Got mine ordered yesterday. Can't wait to get it flying. It'll actually be my first of the mini series.

Great job on the build thread, Tom. Came out great :) Looks like it rolls insanely fast!

Awesome flying, Benton. I always enjoy your videos.

Thanks, I have more vids and stuff to finish the thread, but my stupid workstation PC decided to take a dump. I hope it's just the motherboard and not the i7 965 processor. I don't have the cash to buy another right now. I think I paid $1500 for it new and Christmas has exhausted my extra cash at the moment.
 

AKfreak

150cc
AKfreak Hope I can see you at an event someday soon. Have you thought of coming to Joe Nall in May some year?
Only Fine Helis I like close to Charlotte maybe we will see each other soon at a Carolina event.
Benton
BTW I flew at the flying club yesterday when the wind was blowing 15 mph. No one would fly so I pull out the mini. Forward speed at full throttle was only about 5 mph but it did handle the wind. Funny a plane that only weighs 3 ounces will fly when nobody else wants to fly.

I want to go to Nall badly, it's very far, and I have to drive to haul the gear. Then the kids have to go, and then there's no room for planes, so it's going to be tough. I may just load the van, drive by myself, and camp next to the van. I need to fly my kids to grandma first. All in all, I think the trip would cost me $2000 if I didn't buy a single thing. But that would be tough because I know I would end up dragging an EF 35% extra home.. So the trip would be $3000+. ;). But it would be worth it...
 
Top