• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

The 3DRCForums -Discuss Anything Thread-

Ahblair4

Ahblair4

70cc twin V2
3Daddict said:
LOL, the weather has been pretty crappy here lately too, we have had a lot of high winds and rain lately. I am ready for it to get warm. It is going to get blisteringly hot this thursday. It will be 80 degrees. Thankfully we have air conditioning, I do not know if I will be spending a lot of time outside in that heat.
Click to expand...

It's been a big, windy convection oven in Vegas :(
 
bbrown2828

bbrown2828

150cc
1973793_644100518992120_1063762692420247245_o.jpg Mimi Mason got this cool pic at Texarkanna
 
Olie

Olie

50cc
Derp.

Just ordered parts for my night light kit.

>5800 lumens at full tilt... better keep her under 10%
 
AtomicFlyer

AtomicFlyer

50cc
After every 10 to 20 flights, I find my pull-pull rudder cable has stretched and I need to tighten the turnbuckles half a turn or so. Do you guys find this needs to be done for the life of the airframe? Or will they stretch to a certain point and then stretch no more? Or should I maybe use a cable other than what came with the 3DHS kit?

Thanks,
Marc
 
hone

hone

150cc
AtomicFlyer said:
After every 10 to 20 flights, I find my pull-pull rudder cable has stretched and I need to tighten the turnbuckles half a turn or so. Do you guys find this needs to be done for the life of the airframe? Or will they stretch to a certain point and then stretch no more? Or should I maybe use a cable other than what came with the 3DHS kit?

Thanks,
Marc
Click to expand...

That's normal. They should only stretch so far though so you should only have to tighten them up once or twice.
 
You must log in or register to reply here.
Top