• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Recent content by xCrashNBurnx

  1. xCrashNBurnx

    Jeti DS-16 and Telemetry

    I spoke to Dan at Esprit Model and he explained to me the current work around for mixing ailerons to rudder for knife edge roll coupling.
  2. xCrashNBurnx

    Jeti DS-16 and Telemetry

    Hey Joe, can you explain to me how to set up knife edge mixing? In my old radio, I could specify a rudder direction. However, on the DS-16 it seams as though a Rudder to Aileron mix will mix in the ailerons no matter what direction you're flying. I saw a few posts about setting up 2 mixes, one...
  3. xCrashNBurnx

    Jeti DS-16 and Telemetry

    You won't be disappointed. The DS-16 is amazing! It has a 3 axis gyro and accelerometer in it as well. So, you can also set it up to tell you how much of your battery you've used by simply tilting the radio in the direction you specify.
  4. xCrashNBurnx

    Jeti DS-16 and Telemetry

    Oh yeah, that makes sense, I didn't think about that. Thanks Joe.
  5. xCrashNBurnx

    Jeti DS-16 and Telemetry

    After checking out Joe Smith's and Wamsy's Jeti radio at the Mid-American Fly-Low-In at Cape Girardeau, I had to have one of these. Fast forward a month and I saved up enough money to make the switch from Hitec. So far I'm very pleased but have one question. How do you guys install your MUI...
  6. xCrashNBurnx

    Bowling Green Extreme 3D Fly-In, July 25-28, 2013

    I'm looking forward to this event. Finally get to break in my new trailer. I guess I better start getting all my gear together.
  7. xCrashNBurnx

    2nd Annual 3DHS Mid-America Fly-Low-In - June 27-30, 2013 Cape Girardeau, MO

    Very well said Fred. I'd also like to personally thank Joe for putting up with all my questions and me looking over his shoulder to get some pointers. Also, big thanks to Wamsey for letting me check out his new Jeti DS-16, it was actually nice to get it in my hands. However, between you and Joe...
  8. xCrashNBurnx

    2nd Annual 3DHS Mid-America Fly-Low-In - June 27-30, 2013 Cape Girardeau, MO

    Better late than never. Here is the official flyer for the event.
  9. xCrashNBurnx

    2nd Annual 3DHS Mid-America Fly-Low-In - June 27-30, 2013 Cape Girardeau, MO

    All I need to do is grind a little more of the cowling away, still having trouble getting it to slide over the exhaust. Other than that, she's ready.
  10. xCrashNBurnx

    2nd Annual 3DHS Mid-America Fly-Low-In - June 27-30, 2013 Cape Girardeau, MO

    What day are you taking your stuff to the field? I got the inside of my tailer painted yesterday and 95% of the flooring installed today. Now I just have to build the racks for the planes and I'll be set. I took Thursday off so I should be there before noon.
  11. xCrashNBurnx

    Extreme Flight 60" Edge 540T Assembly

    Agreed. This is the best build log ever. The recommendation to use some balsa spacers to help maintain a good spinner gap while trying to align the rest of the cowl is a huge time and frustrations saver. I've never seen the trick of filling larger gaps by using baking soda and then wicking in...
  12. xCrashNBurnx

    Motor Mounting Question

    Cool, thanks guys, I'll try that.
  13. xCrashNBurnx

    Motor Mounting Question

    All four of my other 3DHS airframes, including my 51" Slick, came pre-drilled and with blind nuts already installed .
  14. xCrashNBurnx

    Motor Mounting Question

    Just wanted to get other suggestions on how others mount their motors on 3DHS planes that aren't pre-drilled. The reason I ask is because of a few snags that I ran into on my 58" Edge build that wasn't pre-drilled with blind nuts already installed. I drilled out the holes, no big deal there...
  15. xCrashNBurnx

    Help! My 3DHS 57" Extra 330SC has a warped aileron and I need advice.

    WOW! Thanks for all the great advice! If I encounter the problem in the futire I'll have to give it a shot. I've done the same thing for a slight twist in a surface but never a bow. Fortunetly for me though, Noll responded to my email already and said they'll take care of it, so a new wing is on...
See more
Top