• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Recent content by siko_flyer

  1. siko_flyer

    Skip Stewart's P3 Revolution, 60cc, Horizon Hobby, NEW!

    I was always a Hitec fan, but I could not afford Hitec's with the torque I needed and the amount of servos needed for my 104" slick, I went with Savox and they will probably be the only thing I use from now on.
  2. siko_flyer

    Your assistance is requested please

    I want to let everyone know that we have reached the amount we need to bury my son. My family and I thank you all for the donations,kind words,thoughts and prayers.God bless you all. Jeff Sikes and Family
  3. siko_flyer

    Your assistance is requested please

    Thank you all for everything.I asked to do this here because I know my flying brothers care.Perhaps one day I will get the chance to fly with you all. Jeff Sikes and Family
  4. siko_flyer

    Your assistance is requested please

    Thank you all for helping,and thank you for the prayers.This is the hardest time I have ever had in my life.Words can't explain how much I appreciate the help.Attached is a picture of my son so everyone can put a face to their prayers. Jeff Sikes and Family
  5. siko_flyer

    Your assistance is requested please

    The PayPal account is mandykay1018@yahoo.com it is under his wife's name and can be transferred to the memorial fund set up at their bank. We thank you all for your kind words. Jeff Sikes siko_flyer
  6. siko_flyer

    Tech-aero IBEC question

    Hitec also tried to pass the buck, in the end the IBEC's were not the A9 culprit. I have run the A9 since it came out and with Tech Aero IBEC's with no issues at all. That said I had a friend loose 2 100cc planes with the A9 and I was present for one of them. Neither plane had an ibec in it. The...
  7. siko_flyer

    Tech-aero IBEC question

    May not be the ibec,could be a bad connector.
  8. siko_flyer

    Needed Advise from my GSN forum Friends!

    Took almost a year to get my 35% gear from GT,matter of fact, I ordered another set from TNT and when the GT gear finally showed up I didn't know what it was until I opened the box because I had forgotten about it.Was supposed to be a direct replacement for the plane but wasn't even close.Won't...
  9. siko_flyer

    bizarre issue with airplane

    I get them from Aztech.
  10. siko_flyer

    bizarre issue with airplane

    I like these for holding wires, I put the wires in then add a drop of ca on the split.
  11. siko_flyer

    bizarre issue with airplane

    I've seen a bad servo cause another to freak out, try unplugging one servo at a time(all of them) to see if problem stops. I also saw one do this when the throttle servo was mounted under the cowl, moved it inside fuse and problem solved.
  12. siko_flyer

    SleepyC, Consider Yourself Challenged

    Looser has to streak through the pits after all the kiddo's are asleep!!!
  13. siko_flyer

    You Know it is too Windy to Fly When...

    Probably why the ladies are smiling.:spongebob:
  14. siko_flyer

    Hauling Your Plane in a Pickup... Best Ideas? Post them here!

    I used to worry about that and I would tape the rudder, then one day I forgot and when I saw it in the rear view I noticed the rudder would self center and stay there.Even in a crosswind it stays straight until I slow down for a light or stop sign,or old person crossing the road,or a critter...
  15. siko_flyer

    Hauling Your Plane in a Pickup... Best Ideas? Post them here!

    I use my truck,all I do is have a styrofoam block with a wood dowel through it that I bungee cord at the back of the fuse to keep the tail wheel from being hammered on bumps, otherwise I just tie it with rope to the bed hooks and go. Carry a 50cc and 100cc at the same time this way.
See more
Top