AKfreak
150cc
Hye guys I am almost ready to fly my new plane but I have a few little items to address be I do. I have a ZTW Gecko Opto 120HV and the MotrolFly 4330 215kv swinging a 20x8W XOAR prop
Can you tell me what timing the 4330 likes the best, because I do have a tiny bit of cogging off throttle. Speaking of throttle, I can actually go full throttle and pull it back to 1/4 without gaining too much speed on the prop. To say the throttle response is a little soft is an understatement. Timing is set to Auto, Braking Off, Start Strength is 30%, Cutoff is 3.00V 60%. I want to set my endpoints manually.
I am used to Castle where I manually set the throttle endpoints. Also my 85 Gecko on the 4315 is extremely responsive, and I think I set up the 120 the same way.
So close, but I need a little help. Thanks, AKf
Can you tell me what timing the 4330 likes the best, because I do have a tiny bit of cogging off throttle. Speaking of throttle, I can actually go full throttle and pull it back to 1/4 without gaining too much speed on the prop. To say the throttle response is a little soft is an understatement. Timing is set to Auto, Braking Off, Start Strength is 30%, Cutoff is 3.00V 60%. I want to set my endpoints manually.
I am used to Castle where I manually set the throttle endpoints. Also my 85 Gecko on the 4315 is extremely responsive, and I think I set up the 120 the same way.
So close, but I need a little help. Thanks, AKf