3D old school Aeroworks edge rebuild.

[rollingharrier]

So I picked up a used and abused aero works edge for 250 bucks. It came with a carbon fiber tube and 10 rolls of covering. BTW the guy who sold it to me said it was mint!


1751=901-IMG_20140702_221650.jpg

1751=902-IMG_20140702_222452.jpg

 

[rollingharrier]

So here is the fuse now.
1770=914-IMG_20140704_155844.jpg

 

[Bunky.F.Knuckle]

Mint my Aunt Fanny!!



Can you tell if it is the old red and white arf or a kit build??

 

[Snapasaurus]

What size Jim?

 

[Whidbey1]

I had one of those in 99 I believe, looks like a 36%

 

[Bunky.F.Knuckle]

I had the ARF in '03. Airplane flew good. But after all the flights I put on it, I decided to recover/refinish it. 4th flight after the recover, coming out of a parachute, right wing blows off the tube. There was a mod for it, and noone knew about it until after they thrashed the airplane.

 

[rollingharrier]

Bunky F. Knuckle;1781 wrote: Mint my Aunt Fanny!!



Can you tell if it is the old red and white arf or a kit build??

Not the ARF. Old.school kit built!

 

[rollingharrier]

Snapasaurus;1807 wrote: What size Jim?

I guessing 40%. 118 inch wing and it takes a 150.

I have another one that needs repair after I forgot the wing bolt ! LOL

Whidbey1;1847 wrote: I had one of those in 99 I believe, looks like a 36%

 

[Ant]

I have the old arf red/white version with a DA100. The plane actually belonged to AMA Andy and was flown at a huckfest where Andy pretended to fly his butt off, but Cody was actually hiding in a bush flying it.Pretty funny.



I must fly a tad harder than Andy, because my wings are showing signs of parting way...lol

 

[Snapasaurus]

Ant;2437 wrote: I have the old arf red/white version with a DA100. The plane actually belonged to AMA Andy and was flown at a huckfest where Andy pretended to fly his butt off, but Cody was actually hiding in a bush flying it.Pretty funny.



I must fly a tad harder than Andy, because my wings are showing signs of parting way...lol

I remember that.