• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!
  • Unless you are a paid advertiser NO more posting advertisement in the individual vendor forums. You may post in the Manufacturer's Announcements section only but only ONCE a month unless your a paid advertiser.

100cc Sbach repair

teookie

70cc twin V2
Hi guys. I want to share some pictures of my Sbach.

Here she is on maiden day.

IMG_1052.JPG


This picture is also from maiden day: :(

IMG_1062.JPG


The rudder servo failed and locked the rudder at full left deflection and it crashed. It sucks but I think this story will have a happy ending.

Pilot RC will send you free parts if you need to repair your plane so I took some pictures of the wreckage and sent them to Tony the president of Pilot RC. About 2 weeks later I got a box of laser cut parts and all I had to pay was shipping! Amazing!

http://www.GiantScaleNews.com/forums/attachment.php?attachmentid=487629&d=1341959634

So I started the build/repair.

http://www.GiantScaleNews.com/forums/attachment.php?attachmentid=488893&d=1342628254

This plane was actually super easy to put back together, thanks to all the interlocking parts, and before I knew it, I had the fuselage put back together.

http://www.GiantScaleNews.com/forums/attachment.php?attachmentid=509075&d=1347813536

And here she is today:

2012-10-07_14-16-10_93.jpg


All I have left to do is replace the right wing (I'd rather get a new one then try and repair the smashed one), repair some minor damage to the left elevator, and do a little more repair work on the canopy to get it to fit right. After that it will be practically brand new again. :D I can't wait!
 

teookie

70cc twin V2
Hmmm. Didn't realize I was posting something to the front page of the website. Is there another sub forum that I should have put this in?
 

gyro

GSN Contributor
You didn't post to the front page, I liked your post so much I promoted it to an article :)
 
Top