• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Scale BUSA Super Cub

    I put the Daytona White on the wings today. I started this build back in 2006 for a friend, our flying styles changed over the years and he began flying large scale Aeroworks planes. This plane went by the way side and I have been moving it around for years, can't you how many Aeroworks planes...
  2. TonyHallo

    Inside the Roto 85FS

    The left side pushrod sleeve seals were leaking on the engine in my Champ, while the plane is down for refinishing I planned to replace the seals. I ordered a gasket set from Vogelsang Aeroscale some time ago. The cylinder head must be removed to accomplished this task. I have possibly an...
  3. TonyHallo

    Scale Wendell Hostetler 30% Piper Cherokee Glass Fuselage Build.

    So I have the Champ ready to paint and a friend from out of town is staying with us for the next few days, I don't want to do the paint work while she is here. Let's start another build then. I decided to start a new build and this will be focused on building the glass fuselage. Appowner and I...
  4. TonyHallo

    8th Annual Summer Solstice Fun Fly, June 18, 2022, Indiana, PA

    June 18, 2022 (Rain Date June 25, 2022) Indiana Flyer’s Club Field Located off Snyder Rd, Indiana, PA GPS coordinates: N40° 33.192' W079° 06.069’ This fun fly is open to all pilots with AMA membership, no landing fee, all types of aircraft (Including turbines) and rotor craft are welcome. Come...
  5. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Well for a while now been wondering what to build next. Yesterday while doing a range check on a new receiver installation in the Piper Cherokee shown in my avatar, I forgot to set the radio back to full power, not sure how I did this but at any rate I did! Below are the photos of day one...
  6. TonyHallo

    7th Annual Summer Solstice Fun Fly

    June 19, 2021 (Rain Date June 26, 2021) Indiana Flyer’s Club Field Located off Snyder Rd, Indiana, PA GPS coordinates: N40° 33.192' W079° 06.069’ This fun fly is open to all pilots with AMA membership, no landing fee, all types of aircraft (Including turbines) and rotor craft are welcome. Come...
  7. TonyHallo

    IMAC Carden Aircraft

    Not sure I went to their web site but this is what I found https://www.carden-aircraft.com/. Surprised I didn't read about this before. I would think this would be be big news?
  8. TonyHallo

    6th Annual Summer Solstice Fun Fly - Indiana Flyers Club, Indiana, PA

    June 20, 2020 (Rain Date June 27, 2020) Indiana Flyer’s Club Field Located off Snyder Rd, Indiana, PA GPS coordinates: N40° 33.192' W079° 06.069’ This fun fly is open to all pilots with AMA membership, no landing fee, all types of aircraft (Including turbines) and rotor craft are welcome. Come...
  9. TonyHallo

    Gypsy Moth Fliers Club Fun Fly - AMA Charter 5346

    May 30, 2020 (Rain Date May 31, 2020) Gypsy Moth Fliers Club Field located at: 422 Cedar Run Road Allison Park, PA 15101 All types of aircraft are welcome to this event, no landing fee, AMA required. The link will take to the same page as the attached map. I'm sure there's a better way to...
  10. TonyHallo

    FrSky AT-V1 Telemetry Install

    I found this telemetry board at Aloft Hobbies for $34.50 which included two temperature sensors. It is plug and play with the FrSky smartport. The kit includes lugs for mounting the temperature sensors on CM-6 plugs, however I am installing this on a Valley View 40 twin with 1/4-32 plugs. A...
  11. TonyHallo

    Scale Byron Glasair Build

    Well I set the Champ aside for the time being and got the first coat of primer on the Glasair. I use a 1/2" pipe with the flange on one end to hold and rotate the fuslage and cowl. The flange is bolted to the engine mount, there is a wood donut supporting the cowl at the spinner opening. The...
  12. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    My first build here on GSN, so let's get it started. I started building the ribs last winter while recovering from back surgery. There are a total of 50 pieces in each rib. I made is jig out of 3/4" plywood. I think the maximum ribs produced in a day was three since I was using Titebond II...
  13. TonyHallo

    Indiana, PA Summer Solstice Fun Fly

    June 17, 2017, rain date June 24, 2017, see attached flyer.
  14. TonyHallo

    Indiana Flyers Club Fall Fun Fly & Swap Meet

    September 10, 2016 IFC Club Field, Snyder Rd, Indiana, PA See attached flyer
Top