• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

The 'What did you do in your workshop tonight?' thread

stangflyer

I like 'em "BIG"!
Except...
I’m going to convert it to a super otter and go electric.
Electric?
shocked-smiley-emoticon.gif
Did I hear you correct? Did you really say, electric???
ass-kicking.gif

I just can't believe my eyes. It looked like you said... electric!!!
hearty-laugh.gif

Just kidding bro. I think it would be terrific burning molecules of 'lectricity. If it were 90-100 inch, I'd slap ya.
:msn_slap:
Lol. Looking forward to your progress.
 

49dimes

Damn I'm hungry
Since I have a bit of time (before my radio arrives) I am taking my time getting the CAP 232 EX assembled. Got the guts better organized and the two remote Rx's installed. Lots of room for easy battery change outs. Painted the spinner and cowl front to "clone" my dearly departed :ooh?:.
GOPR0374.JPG
GOPR0373.JPG
GOPR0375.JPG
 

AKNick

640cc Uber Pimp
To be honest, the radial otter was a terrible flying airplane. The turbonized super otter is what made it what it still is today. The sound of a prop twirling around will sound close to a turbine.
I will need to make some floats somehow for it though....
I’m going to mimic a specific color scheme that is still flying here in Juneau. There are maybe ten here.

Electric?
View attachment 108157
Did I hear you correct? Did you really say, electric???
View attachment 108158
I just can't believe my eyes. It looked like you said... electric!!!
View attachment 108159
Just kidding bro. I think it would be terrific burning molecules of 'lectricity. If it were 90-100 inch, I'd slap ya.
:msn_slap:
Lol. Looking forward to your progress.
 

Xpress

GSN Sponsor Tier 1
Of course I didn't take any photos but I got my hands on a coworkers 70" Slick and started to work on fixing some things that just weren't right with it. Started off by readjusting the rudder pull pull cables. They had stretched so much over the years that the cable ends were screwed all the way into the ball links on both ends of the cable. Fortunately for me, the servo output shaft was facing rearward, so all I had to do was flip the servo around and readjust the cable ends in the ball links. Nice and taught now.

Both the rudder and elevator servos were mounted hard to the wood. I'm not really into that, plus the screws were driven so deep into the hole in the wood that the unthreaded portion of the shaft was basically just pressed in place with no screw threads hooking into the wood :oblong: Phillips head screws painstakingly removed, holes saturated with thin CA to make the wood swell, grommets/eyelets installed onto servo rails, and finally screwed the servo in place with some nice black hex head screws from TDRC. Everything is nice and sturdy now, and some minor adjustments to the hole positions on the servo horns had the rudder and elevators driving to their limits with most of the servo resolution being used.

Also did up some baffling for the motor and ESC since I recall there was an issue with overheating in the past. Hopefully this will keep it all cool, I may swap the 80 amp ESC out for a higher amperage unit as I recall current figures being very close to 80 amps static. By the way, the Slick is this sweet scheme:

IMG_5594.jpg
 

AKNick

640cc Uber Pimp
31A0BA0E-4C09-4D42-AE69-940DE4718760.jpeg
Some times you just gotta step away and let your garage door open because it smells like CA and balsa dust. Third day/afternoon playing with otter and it’s starting to take form. I forgot how addicting a stick build can be. I can’t leave it alone!! But I must!! Lest my sinuses will hate me.
 

49dimes

Damn I'm hungry
Does not take long even when deliberately taking time to assemble. Looking as if that "dirt nap" never happened :big-grin:.
One thing I am doing different though. Using 3mm hex head servo horn screws and 3mm x 26mm stainless hex head screws for LG, wing attachment and motor mount. Supplied hardware for these areas is a bit cheesy :thumbsdown:.

GOPR0376.JPG
GOPR0377.JPG
GOPR0378.JPG
 
Top