• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

The 'What did you do in your workshop tonight?' thread

Snoopy1

640cc Uber Pimp
View attachment 101404
Old router that gets hot really quick.
View attachment 101405
How it was mounted in my table saw wing before. Just a hole in the middle and bolted on.
View attachment 101406
New router. Well was new over a year ago and just now getting around to using it.
View attachment 101407
Scrap aluminum turned into an insert plate.
View attachment 101408
Used new router with straight but to cut away where I marked out for the insert plate. Not pictured but I came back with jig saw and cut it out leaving a 1/2” lip all around.
View attachment 101409
Insert plate and router installed. This makes big changes easy. Next up I need to build a router lift but that will come later.
View attachment 101410
View of it all. Made a new zero clearance insert for the saw as well.
View attachment 101411
Big pile of saw dust.
View attachment 101412
Saw dust produced from finally using my thickness planer for the first time.
View attachment 101413
Got some new nice chisels so I figured they where worthy of being displayed and not just bouncing around in a drawer.
View attachment 101414
Just some scrap pallet wood run through the planer to clean it up.

All in all yesterday was a productive day in the shop though none of it was RC related.
Yes it was you are getting the workshop ready to do some serious building and all the necessary tolls required to make the plane quick and straight.
 

BalsaDust

Moderator
Yes it was you are getting the workshop ready to do some serious building and all the necessary tolls required to make the plane quick and straight.


Yup. Getting ready to relocate my shop to the other side of my basement so I wanted to get a few other things done for that move. I have also drawn up a nice storage unit in CAD that I will be building. It will hang on the wall and hold those metal drawer units I posted a week or so ago, all my plastic storage bins, all the saw blades for my various saws, sandpaper, and my palm sanders. I'm doing this in an effort to condense things a bit as I will be loosing a little space moving to this other portion of the basement. don't want to move to less space but the ultimate goal my wife and I have for the basement would prevent me from being able to get large wood stock into my shop so it will have to do until I can build a detached building to be my shop.
 

Snoopy1

640cc Uber Pimp
Yup. Getting ready to relocate my shop to the other side of my basement so I wanted to get a few other things done for that move. I have also drawn up a nice storage unit in CAD that I will be building. It will hang on the wall and hold those metal drawer units I posted a week or so ago, all my plastic storage bins, all the saw blades for my various saws, sandpaper, and my palm sanders. I'm doing this in an effort to condense things a bit as I will be loosing a little space moving to this other portion of the basement. don't want to move to less space but the ultimate goal my wife and I have for the basement would prevent me from being able to get large wood stock into my shop so it will have to do until I can build a detached building to be my shop.

Helped a friend a few years back build a shop 20 by 30 feet beautiful shop walls and roof insulated The works and a big furnace as well. Also built a car hoist in it and all kinds of extras and comfort things. But the only thing we did not do insulate the concrete floor and that made the hole shop useless. The floor was always cold and with in no time your feet were frozen no mater what. So 2 years back he had the hole floor removed and then insulated ground properly and then poured in a new floor. What a difference the shop to day is great and we spend many hours in their during the winters.
 

BalsaDust

Moderator
Helped a friend a few years back build a shop 20 by 30 feet beautiful shop walls and roof insulated The works and a big furnace as well. Also built a car hoist in it and all kinds of extras and comfort things. But the only thing we did not do insulate the concrete floor and that made the hole shop useless. The floor was always cold and with in no time your feet were frozen no mater what. So 2 years back he had the hole floor removed and then insulated ground properly and then poured in a new floor. What a difference the shop to day is great and we spend many hours in their during the winters.


Yeah proper insulation under it and when I do it I will be running all the water lines in it to make it a heated floor. My old boss had the electric radiant floor heat in a few rooms of his house. Kept his house warmer and used less electricity to run it. Being radiant heat it actually heats up objects in the house versus just heating the air like a heat pump does.
 

BalsaDust

Moderator
95F6F77F-EDD0-40F8-9378-9167FC1D13BC.jpeg


Decided to play around with the 3D side of CAD. Still have lots to learn but this is a start.
 

Snoopy1

640cc Uber Pimp
Yeah proper insulation under it and when I do it I will be running all the water lines in it to make it a heated floor. My old boss had the electric radiant floor heat in a few rooms of his house. Kept his house warmer and used less electricity to run it. Being radiant heat it actually heats up objects in the house versus just heating the air like a heat pump does.
Be careful with radiant heating as said it warms the surface and not the air. In the steel industry as you know the buildings are so large that they are impossible to heat so therefore we use radiant heaters for the people at their workstations. But when you have delicate machinery or precision machinery making a product radiant heat can do some strange things to machinery when it is only heated from one side. We took some extraordinary precautions to prevent uneven heating to equipment.
 

BalsaDust

Moderator
I just looked at a couple of youtube videos and really just started playing around with it. I think I'm gonna download the student version of Inventor as I here its easier.

I wont have any special machinery in my shop. Most I may have one day is a manual mill and lathe and hopefully at some point pick up a CNC router. Other than that it will be all your normal wood working power tools.
 

ericrs

70cc twin V2
Yeah proper insulation under it and when I do it I will be running all the water lines in it to make it a heated floor. My old boss had the electric radiant floor heat in a few rooms of his house. Kept his house warmer and used less electricity to run it. Being radiant heat it actually heats up objects in the house versus just heating the air like a heat pump does.
My shop has floor heat in it, and I really like it. It is very comfortable to work in. It can be 0 degrees out, and I can work in 65-70 degrees inside. I highly recommend it.
I just looked at a couple of youtube videos and really just started playing around with it. I think I'm gonna download the student version of Inventor as I here its easier.

I wont have any special machinery in my shop. Most I may have one day is a manual mill and lathe and hopefully at some point pick up a CNC router. Other than that it will be all your normal wood working power tools.
I just got a major upgrade to my shop the other day. Something I have been wanting and needing for my business for some time now. I bit the bullet and bought a CNC Router. Although the price really hurts, it is so cool how quick and accurate they are. I have been able to do a couple small jobs with it. Still have a lot to learn, but it hasn't been as hard as I first thought it would be. The first pic is my router, and the other two are a sample sign that I cut, and a small cabinet nest I cut getting my software all set up. That is what I have been doing in my shop lately. No airplane stuff because I am not building anything this winter, just going to fly what I have.
 

Attachments

  • 2018-01-04 17.08.38.jpg
    2018-01-04 17.08.38.jpg
    2.1 MB · Views: 435
  • 2018-01-10 17.55.57.jpg
    2018-01-10 17.55.57.jpg
    1.7 MB · Views: 465
  • 2018-01-12 17.18.29.jpg
    2018-01-12 17.18.29.jpg
    2.2 MB · Views: 482
Top