Welcome To GiantScaleNews.com

GSN is the BEST in an RC online community. Less corporate BS and more down home fun. Better conversations with REAL RC'ers. Don't settle for the biggest when you can have the best!
  1. If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!



Giant Scale R/C news, forums, classifieds, event coverage, and more!

by dhal22 : Nov 7, 2020 at 7:51 AM
It was found recently that my DA170 carb butterfly will not close completely on one side. Perhaps warped or bent? Anyway, the issue allows the engine to idle too high and I'd rather not sent the engine to DA. Beyond that the engine rips and makes me grin. And the plane the DA is in. Btw, not me there holding...
by dominicm : Nov 5, 2020 at 6:50 AM
Very quick assembly but the transmitter setup for the elevons and canards was a little challenging. On first flight I failed to get this jet in the air with 6S6000 pack. CG too far forward. But with 6S5000 it jumped into the air. Trimmed out for roll quickly on first circuit then hit the deck for low smooth passes...
by dominicm : Nov 3, 2020 at 7:51 AM
I thought this was quite a nice scale feature. Not seen it before so great to be able to film it in action. Don't think I would want to be the guy in the basket though ! :eek:
by dominicm : Oct 30, 2020 at 1:39 PM
The Michelangelo of Depron, Jürgen Schönle, is back with another of his amazing one off scratch built creations. These micro RC aircraft take significant effort to build. Jurgen told me that some of the individual parts can take 10 attempts to create because the 0.2mm depron material used is so fragile. For that...
SOLD! Sold
by GSNadmin : Oct 23, 2020 at 2:43 PM
I have a built Golden West Models MiG 21, with retracts setup for a turbine. Some Servos are installed retracts are air and scale. got it years ago from a very avid jet pilot owner. Asking 1500.00
by Blazing Wings : Oct 8, 2020 at 5:52 PM
Started on a new Project. This will be a static display plane for a business.
by BobUSA : Oct 8, 2020 at 12:37 PM
Fittings come with no barb or a single barb depending on your tank set up. All 3 o-rings are Viton. $22.99 ea, $4.00 shipping. Paypal: BobthecatUSA@yahoo.com Bob